_Limit Groups/Color Groups
- Edward Barrier (Unlicensed)
These are performance metrics in a DOR report that are being highlighted by a "Limit Group"
Editing a limit group
A limit group can be added by navigating to WebAdmin → RecipeAdmin → Limit Group Admin
Select a limit group in the dropdown, then click "Load Limit Group" to edit an existing limit group.
For "Low" (Red Arrow) values, enter the formula or recipe where the low color should begin. For "High" (Green Arrow) Enter the value that would exceed the target and the high color should start. "Target"(Yellow Arrow) value should be the target value
however, the target color will highlight any value between high and low. Here is a rough explanation of how the limit group values highlight.
End result is cells in a DOR report that will highlight with the color based upon the value it contains.
Click "Save Limit Group" when finished.
Editing a Color Group
Navigate to "Color Group Admin" on the Recipe Admin Page.
Select an existing color group from the dropdown and click "Load Color Group"
Here, select the appropriate color background and/or text color for each limit.
Click "Save Color Group" when finished.